At Laser Dynamics along with CNCPROCUT we run Six different profile cutters.

With these, we will be able to cover all your profiling requirements.

LASER DYNAMICS SERVICE

Laser Cutting

  • 2x LVD PHOENIX FL
    • 6 KW Laser
    • Cutting bed measuring 6 metres by 2 metres
    • Twin transferable table
    • Etching and Marking capabilities
    • Cutting of 0.5mm to 25mm thickness (depends on material type)

CNC PROFILE CUTTING SERVICES

Plasma Cutting

  • 200 & 260 Amp High Definition Plasma; Ability to precision cut plate up to 65mm
  • Automated bevel head; Range 0-45° top to bottom and unlimited 360° rotation
  • Etching & Marking Capabilities
  • Cutting beds up to 26 metres by 3.4 metres

Bevel Cutting

  • 260 Amp High Definition Plasma; Ability to cut bevels on plate up to 50mm
  • Oxy-Fuel; Ability to cut bevels on plate up to 100mm
  • Automated bevel head; Range 0-45° top to bottom and unlimited 360° rotation

Drilling and Tapping

  • Two Kinetics 3000 with 10HP Servo Turrets
  • Capable of drilling Mild and High Tensile Steel; range 3-26mm
  • Capable of tapping Mild and High Tensile Steel; range M3-M14

Oxy-Fuel Cutting

  • Two Kinetic 3000’s with twin Oxy-Fuel torches
  • Capable of cutting plate up to 300mm
  • One D.P.S. Silhouette 1800G with twin Oxy-Fuel torches
  • Capable of cutting plate up to 200mm

Pressing Service

1 x 600 tonne brake press

  • 6 metre bed

1 x 400 tonne brake press

  • 4 metre bed